TECH ARTICLES AND INFORMATION

GMTH400 FOR A  MAZDA 13B ENGINE
Here are some photos of a custom built GMTH400 transmission to be installed behind a Mazda 13B rotary engine.This transmission was custom built for a customer in the United Arab Emirates.For this job we had to make a special adapter plate that on one side mated the original Mazda bellhousing to the GMTH400 transmission case on the other.We also had to design a custom torque converter that on one side mated the original GMTH400 input shaft,stator tube and pump drive to the Mazda flywheel and crankshaft pilot hole on the other.Special thanks to master machinist Dave Minton and  Joe Rivera Jr. of Pro Torque for their patience and assistance with this sucessfully completed hybrid transmission.

               hybridtrans1        hybridtrans2   


               hybridtrans3        hybridtrans4


GMTH400 FOR A FORD 4.6 ENGINE

Here are some photos of a custom built GMTH400 transmission to be installed behind a twin turbo 4.6 Ford engine.This transmission was custom built for a customer in the southern California.For this job we used a special bellhousing that on one side mated the original 4.6 ford engine to the GMTH400 transmission case on the other.This conversion utilized a standard dimension custom GMTH400 torque converter ,a custom adapter to mate the converter snout to the 4.6 Ford crankshaft pilot hole,and a custom 4.6 Ford flywheel that mates the standard GMTH400 converter mounting pads to it. Special thanks to Joe Rivera Jr. of Pro Torque for supplying the torque converter for this sucessfully completed hybrid transmission.

                TRANS1       TRANS2

        
                TRANS3       TRANS4


















                               

GM Transmissions | Ford Transmissions | GM AOD Hybrid Overdrive Transmissions | Tech Articles & Information
Hi Performance Engine Build-ups | Customer Car Photos | Customer Feedback | Contact Us